Whites XLT User Manual download pdf (Page 48)

Chapter 5 XLT

Pro Options

TRANSMIT FREQUENCY

MIN MAX

(Signal, Transmit, Receive))

28. Transmit Frequency

Alters the normal operating frequency (6592.5 Hz)

to avoid interference from other metal detectors

operating close by. Operating frequency is the

frequency the detector transmits and receives its

signal.

Lower numbers equal

lower frequencies, 1 = 6027.5 Hz

2 = 6204.7 Hz

3 = 6392.7 Hz

4 = 6592.5 Hz

Higher numbers equal

higher operating 5 = 6805.2 Hz

frequencies,

6 = 7032.0 Hz

7 = 7274.5 Hz

Other metal detectors operating at the same fre-

quency will cause interference. By shifting to a

different frequency such interference can be

avoided from detectors operating nearby.

The best performance will be achieved at the

standard number "4" setting. If however, you

cannot search due to interference from other detec-

tors, use an alternate frequency.

Remember that once the trigger is squeezed and

released to return to a search mode, the last option

used can be accessed by pressing either of the arrow

controls. This ARROW RETURN feature can be

used to handily change TRANSMIT FREQUEN-

CIES during a competition hunt.

Tips - Use level number

"4" (6592.5 Hz) unless

interference results from

other detectors. Move

away from level "4" only

far enough to prevent

such interference.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55 56

No comments

Whites XLT User Manual Page 48