Whites XLT User Manual download pdf (Page 32)

Chapter 5 XLT

Pro Options

9. Trac Speed

Dictates when AUTO TRAC™ adjusts Ground

Balance.

Trac Speed allows adjustment of the amount of

ground mineral change required to cause

Autotracking to occur. At slower speeds (lower

numbers) it takes a significant change in the

ground to cause tracking to occur. At faster speeds

(higher numbers) it takes very little change in the

ground mineral to cause tracking to occur. The end

result, more tracking occurs at higher numbers than

at lower numbers. Too much tracking can cause

errors in the ground balance setting. Not enough

tracking can result in the ground balance setting

never catching up with changing ground. TRAC

VIEW is used to see how much tracking is occur-

ring. Generally, a faster (higher number) TRAC

SPEED is needed for more consistent ground

conditions. Slower TRAC SPEEDS (lower num-

bers) is needed for more inconsistent ground

conditions. "TRACK" appearing every three to five

sweeps of the loop is the ideal setting when the

ground conditions will allow.

AUTO TRAC SPEED

MIN MAX

Tips - It is desirable to

select a TRAC SPEED that

tracks the ground once

every three to five sweeps

of the loop however, this

may not be possible in

extremely consistent, or

extremely inconsistent

ground conditions, which

may TRAC less or more

than this desired standard.

(G.E.B./Trac section)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

No comments

Whites XLT User Manual Page 32