Whites XLT User Manual download pdf (Page 18)

Chapter 4 XLT

Basic Adjustments

1. Target Volume

How loud a target beeps when detected.

Select TARGET VOLUME with the ARROW

controls and press ENTER. The current volume

level sounds continuously. The number designating

the current level is shown on the right side of the

display. To the left, the graphic knob indicates the

relationship of the current setting to minimum and

maximum levels.

Use the ARROW controls to select the volume level

you desire. Volume level will select the loudest

possible sound a shallow target can produce. High

volume levels will slightly reduce battery life.

Press MENU and use the ARROWS to continue

viewing and or adjusting Basic Adjustments, or

Squeeze and release TRIGGER to begin searching.

TARGET VOLUME

MIN MAX

Tip - Select the loudest

comfortable level, lower

with headphones, higher

without.

AUDIO THRESHOLD

MIN MAX

2. Audio Threshold

The slight hum or background tone which is nor-

mally heard continuously during searching.

Select THRESHOLD with the ARROW controls,

and press ENTER . The current threshold level will

sound continuously. The number designating the

current level is shown on the right side of the

display. To the left the graphic knob indicates the

relationship of the current setting to minimum and

maximum levels. Note that the maximum threshold

level (42) is well below the minimum VOLUME

level. Thus with the THRESHOLD at maximum,

and the VOLUME at minimum, the detector will

still respond to metal. Use the ARROW control to

select the threshold level you desire. High thresh-

old levels will slightly reduce battery life.

Press MENU.

Tip - Select the lowest

level you can still hear.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Comments to this Manuals

No comments

Whites XLT User Manual Page 18

Comments to this Manuals

Related products and manuals for Measuring, testing & control Whites XLT