Whites XLT User Manual download pdf (Page 20)

Chapter 4 XLT

Basic Adjustments

5. Silent Search

The ability of the detector to be operated without

the threshold or background hum that is normally

heard continuously during operation. The

instrument is silent until a target is detected.

Select SILENT SEARCH with the ARROW

controls and use the ENTER control to turn

SILENT SEARCH ON or OFF.

AUDIO DISC. needs to be ON and MIXED

MODE needs to be OFF for SILENT SEARCH to

perform properly.

In Pro Options the Discriminate feature can be

used to accept all metal targets while using

SILENT SEARCH. It is not possible to achieve a

non-motion searching mode with SILENT

SEARCH ON. When SILENT SEARCH is ON

the all metal pinpointing mode continues to

produce a threshold. This may not be noticed, as

once the pinpoint mode detunes for better target

center locating the threshold is not present.

However, releasing, re-squeezing, and holding the

TRIGGER with the loop at waist level a threshold

will be noted. Press ENTER.

SILENT SEARCH

OFF

TO CHANGE PRESS

ENTER

Tip - A threshold hum is

recommended as it often

fades over rejected

targets providing

information about targets

and ground conditions. If

the constant noise

bothers or distracts you

and reduced AUDIO

THRESHOLD doesn't

help, select SILENT

SEARCH.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

No comments

Whites XLT User Manual Page 20